A adequate chimney is required for the Sedore Stove or any modern wood burner to operate correctly. The chimney provides the "pull" which allows our unique combustion system to work in an efficient manner.
As to chimney guidelines, consider the following:
1. A chimney should be a minimum of 15 feet high above the stove.
2. A chimney should have as few bends as possible - straight up using insulated
(class A) is often best.
3. An interior chimney is much better than an exterior one, because the chimney
stays warm and therefore drafts better.
4. A good chimney is as important - or possibly MORE important than your
stove. Most performance problems and operational concerns are related to
lack of chimney draw (draft).
5. The Sedore Stoves use a 6" flue collar, which can be connected to a chimney
of 6" or larger ID. A chimney which is too large may cool the smoke and therefore
slow the draft. Very large chimneys should be relined with 6" stainless steel
liner.
We would rather make certain that your chimney is correct before your purchase of a Sedore Stove, so if you have any questions or concerns regarding it, please contact us.
Alternate Energy Solutions
Sedore Stoves USA
Bruce W. Wolfe
47909 County Road 37
Deer River, MN. 56636
218-246-2908
bwolfe1@gmail.com
Some good articles about chimneys and draft are located here.(external link)
This stove can burn - WOOD - CORN KERNELS · COBS · CUBES · SCRAP PAPER CARDBOARD · WOOD CHIPS · RECYCLED WOOD · PELLETS SUNFLOWER HEADS · SHAVINGS · SAWDUST